Prof. Dr. TAMER ÖZBEN

Yayın Ağı

Makaleler 18

1. Investigation of membrane deformations of a cylindrical composite shell subjected to tensile loading

Özben T., Gül E.

MECHANICS OF COMPOSITE MATERIALS , cilt.62, sa.3, ss.1-17, 2026 (SCI-Expanded, Scopus)

2. Investigating of the Failure Limit of Composite Plates According to the Angular Displacement Around the Circular Hole

GÜL E., ÖZBEN T.

Mechanics of Composite Materials , cilt.61, sa.5, ss.997-1008, 2025 (SCI-Expanded, Scopus)

3. Jüt Takviyeli Kompozit Prepreg Malzemelerin Charpy Darbe Dayanımı ve Eğme Davranışlarının Analizi

SEN H., Ozben T.

Recep Tayyip Erdoğan Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.6, sa.1, ss.92-109, 2025 (TRDizin)

4. Jüt takviyeli kompozit prepreg malzemelerin yorulma davranışlarının analizi

SEN H., Ozben T.

Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.40, sa.2, ss.1115-1130, 2025 (SCI-Expanded, Scopus, TRDizin)

5. Damage Behavior of Hybrid Composite Plates Exposed to Impacts at Different Energy Levels

ÖZBEN T., ŞEN H.

Mechanics of Composite Materials , cilt.56, sa.3, ss.361-366, 2020 (SCI-Expanded, Scopus)

6. Impact behavior of hybrid composite plates dependent on curing and different stacking sequences

ÖZBEN T.

Materialpruefung/Materials Testing , cilt.58, sa.5, ss.442-447, 2016 (SCI-Expanded, Scopus)

7. Belirli sıcaklık ve sürelerde kürlenen hibrid tabakalı kompozit plaklarının titreşim davranışlarının incelenmesi

ÖZBEN T., KARATEKE E., KARATEKE E., KARATEKE E., ÇALIŞKAN E.

Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.6, sa.1, ss.62-71, 2015 (TRDizin)

8. Impact characteristics of steel spheres dropped into a single layer composite

ÖZBEN T.

Materialpruefung/Materials Testing , cilt.56, sa.1, ss.54-58, 2014 (SCI-Expanded, Scopus)

9. Fuzzy logic model for the prediction failure analysis of composite plates under various cure temperatures

ÖZBEN T., Huseyinoglu M., Arslan N.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.36, sa.3, ss.443-448, 2014 (SCI-Expanded, Scopus)

10. Stress intensity anlaysis of biaxial stressed single elliptical hole in plate according to change of hole inclination and geometry İki̇ eksenli̇ yüklenmjş ve ortasinda eli̇pti̇k deli̇k bulunan plakanin deli̇k geometri̇si̇ne ve eǧi̇mi̇ne göre geri̇lme yoǧunluǧu faktörünün hesaplanmasi

ÖZBEN T., Arslan N., Özbay M.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.26, sa.3, ss.523-531, 2011 (SCI-Expanded, Scopus)

11. FEM analysis of laminated composite plate with rectangular hole and various elastic modulus under transverse loads

ÖZBEN T., Arslan N.

Applied Mathematical Modelling , cilt.34, sa.7, ss.1746-1762, 2010 (SCI-Expanded, Scopus)

12. Analysis of critical buckling load of laminated composites plate with different boundary conditions using FEM and analytical methods

ÖZBEN T.

Computational Materials Science , cilt.45, sa.4, ss.1006-1015, 2009 (SCI-Expanded, Scopus)

13. Expansion of plastic zone and residual stresses in the thermoplastic-matrix laminated plates ([0°/θ°]2) with a rectangular hole subjected to transverse uniformly distributed load expansion

ÖZBEN T., Arslan N.

Computational Materials Science , cilt.44, sa.3, ss.895-912, 2009 (SCI-Expanded, Scopus)

14. Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC

ÖZBEN T., Kilickap E., ÇAKIR O.

Journal of Materials Processing Technology , cilt.198, sa.1-3, ss.220-225, 2008 (SCI-Expanded, Scopus)

15. Selection of cutting fluids in machining processes

ÇAKIR O., YARDIMEDEN A., ÖZBEN T., KILIÇKAP E.

Journal of Achievements in Materials and Manufacturing Engineering , cilt.25, sa.2, ss.99-102, 2007 (Hakemli Dergi)

16. Chemical machining

ÇAKIR O., YARDIMEDEN A., ÖZBEN T.

ARCHIVES OF MATERIALS SCIENCE AND ENGINEERING , cilt.28, sa.8, ss.499-502, 2007 (Hakemli Dergi)

17. An elastic-plastic stress analysis of a woven reinforced steel fiber thermoplastic composite cantilever beam subjected to transverse uniform loads on the upper surface

Arslan N., ÖZBEN T.

Journal of Reinforced Plastics and Composites , cilt.24, sa.14, ss.1493-1508, 2005 (SCI-Expanded, Scopus)

18. An elastic-plastic stress analysis in a unidirectional reinforced steel fiber thermoplastic composite cantilever beam loaded by a single force at the free end

Arslan N., ÖZBEN T.

Journal of Reinforced Plastics and Composites , cilt.24, sa.5, ss.457-469, 2005 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 2

1. MECHANICAL PROPERTIES OF BORON REINFORCED TEXTILE COMPOSITE

ŞEN H., ÖZBEN T.

III. INTERNATIONAL AGRICULTURAL, BIOLOGICAL & LIFE SCIENCE CONFERENCE, Edirne, Türkiye, 01 Eylül 2021, (Tam Metin Bildiri)

2. Yüksek Gerilim Hatlarında Kullanılan Kişisel Koruyucu Donanımlar

ÖZEL K., ÖZGÜR D., ÇETİNARSLAN C. S., HACIHAFIZOĞLU O., ÖZBEN T., MERAL M.

4. Uluslararası Katılımlı Anadolu Enerji Sempozyumu, AES 2018, Edirne, Türkiye, 18 - 20 Nisan 2018, cilt.2, ss.1424-1432, (Tam Metin Bildiri)

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

397

H-İndeks (WoS)

Atıf (Scopus)

521

H-İndeks (Scopus)

Atıf (Scholar)

875

H-İndeks (Scholar)

Atıf (Diğer Toplam)

Toplam Atıf Sayısı

523

Prof. Dr. TAMER ÖZBEN

Yayınlar & Eserler

1. Investigation of membrane deformations of a cylindrical composite shell subjected to tensile loading

2. Investigating of the Failure Limit of Composite Plates According to the Angular Displacement Around the Circular Hole

3. Jüt Takviyeli Kompozit Prepreg Malzemelerin Charpy Darbe Dayanımı ve Eğme Davranışlarının Analizi

4. Jüt takviyeli kompozit prepreg malzemelerin yorulma davranışlarının analizi

5. Damage Behavior of Hybrid Composite Plates Exposed to Impacts at Different Energy Levels

6. Impact behavior of hybrid composite plates dependent on curing and different stacking sequences

7. Belirli sıcaklık ve sürelerde kürlenen hibrid tabakalı kompozit plaklarının titreşim davranışlarının incelenmesi

8. Impact characteristics of steel spheres dropped into a single layer composite

9. Fuzzy logic model for the prediction failure analysis of composite plates under various cure temperatures

11. FEM analysis of laminated composite plate with rectangular hole and various elastic modulus under transverse loads

12. Analysis of critical buckling load of laminated composites plate with different boundary conditions using FEM and analytical methods

13. Expansion of plastic zone and residual stresses in the thermoplastic-matrix laminated plates ([0°/θ°]2) with a rectangular hole subjected to transverse uniformly distributed load expansion

14. Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC

15. Selection of cutting fluids in machining processes

16. Chemical machining

17. An elastic-plastic stress analysis of a woven reinforced steel fiber thermoplastic composite cantilever beam subjected to transverse uniform loads on the upper surface

18. An elastic-plastic stress analysis in a unidirectional reinforced steel fiber thermoplastic composite cantilever beam loaded by a single force at the free end

1. MECHANICAL PROPERTIES OF BORON REINFORCED TEXTILE COMPOSITE

2. Yüksek Gerilim Hatlarında Kullanılan Kişisel Koruyucu Donanımlar

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (Diğer Toplam)

Toplam Atıf Sayısı

Proje

Tez Danışmanlığı

Açık Erişim