Öğr. Gör. MEHMET CEVİZ

Yayın Ağı

Makaleler 10

1. Investigation of Mechanical, Thermal and Microstructural Properties of Waste Micro-Nano Nichrome (NiCr 80/20) Powder-Reinforced Composites with Polyamide 66 (PA66) Matrix

CEVİZ M.

Polymers , cilt.17, sa.20, 2025 (SCI-Expanded, Scopus)

2. Comparative experimental analysis of wear behavior of CuCrZr and CuZn39Pb3 alloys using pin-on-disc test from room temperature to high temperatures CuCrZr ja CuZn39Pb3 sulamite kulumiskäitumise eksperimentaalne võrdlus pin-on-disc meetodil toatemperatuurist kõrgematel temperatuuridel

ÇETİNTAV I., CEVİZ M.

Proceedings of the Estonian Academy of Sciences , cilt.74, sa.2, ss.253-259, 2025 (SCI-Expanded, Scopus)

3. Finite element simulation and experimental study on defects in CuZn40Pb2 brass alloy water valve covers during hot forging Lõplike elementide simulatsioonimudel defektide uurimiseks CuZn40Pb2 messingisulamist veeventiili katetes kuumsepistamise protsessis

CEVİZ M., ÇETİNTAV I.

Proceedings of the Estonian Academy of Sciences , cilt.74, sa.1, ss.82-89, 2025 (SCI-Expanded, Scopus)

4. Characterization of Waste Micro and Nano Tungsten Carbide Powder Reinforced Polyamide 66 Matrix Composites

ÇETİNTAV I., CEVİZ M.

MATERIALS SCIENCE FORUM , cilt.1104, ss.45-51, 2023 (Scopus)

5. Effect of high temperatures on dry sliding friction and wear behaviour of CuCrZr copper alloy

Mlslrll C., CEVİZ M., Çetintav I., Klllç H.

Materialpruefung/Materials Testing , cilt.65, sa.2, ss.258-266, 2023 (SCI-Expanded, Scopus)

6. The Effect of Temperature on Wear Performance of High-Velocity Oxy-Fuel Sprayed WC-10Co-4Cr Coating on AA7075-T6 Substrate

CEVİZ M., MISIRLI C., Karabeyoglu S. S.

Journal of Materials Engineering and Performance , cilt.31, sa.1, ss.128-138, 2022 (SCI-Expanded, Scopus)

7. An Investigation on Thermal Dry Sliding Wear Performance of Wrought AA 7075-T6

CEVİZ M., MISIRLI C., Karabeyoglu S. S.

Transactions of the Indian Institute of Metals , 2022 (SCI-Expanded, Scopus)

8. AN INVESTIGATION ABOUT THE EFFECT OF LOAD ON DRY SLIDING WEAR PERFORMANCE OF AA7075-T6

CEVİZ M., MISIRLI C., KARABEYOĞLU S. S.

Journal of the Technical University of Gabrovo , cilt.63, ss.51-54, 2021 (Hakemli Dergi)

9. A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD

MISIRLI C., CEVİZ M., ÇETİNTAV I., Ersoy B.

Journal of the Technical University of Gabrovo , cilt.63, ss.55-58, 2021 (Hakemli Dergi)

10. The effects on surface roughness of parameters in machining

MISIRLI C., ŞAHİN M., CEVİZ M.

International Journal of Modern Manufacturing Technologies , cilt.9, sa.1, ss.35-40, 2017 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 6

1. Numerical Simulation of Closed Die Hot Forging Process of CuZn40Pb2 Brass Alloy Valve Body Cover

CEVİZ M., ÇETİNTAV I., Gunel D.

2023 International Conference of Computational Methods in Sciences and Engineering, ICCMSE 2023, Heraklion, Yunanistan, 23 - 26 Mayıs 2023, cilt.3269, (Tam Metin Bildiri)

2. Characterization of Waste Micro-Nano WC/Co-Cr 86/10-4 Powder Reinforced Polyamide 66 (PA66) Matrix Composites

ÇETİNTAV I., CEVİZ M.

30th International Baltic Conference Materials Engineering and Modern Manufacturing 2023, Kaunas, Litvanya, 19 - 20 Ekim 2023, (Özet Bildiri)

3. Finite Element Simulation and Experimental Study on Defects in CuZn40Pb2 Brass Alloy Water Valve Covers During Hot Forging

CEVİZ M., ÇETİNTAV I.

3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials(IWPDF 2023), İstanbul, Türkiye, 4 Ekim - 06 Kasım 2023, (Tam Metin Bildiri)

4. An investigation about the effect of load on dry sliding wear performance of AA7075-T6

CEVİZ M., MISIRLI C., KARABEYOĞLU S. S.

UNITECH 2021, Gabrovo, Bulgaristan, 19 - 20 Kasım 2021, cilt.63, ss.51-54, (Tam Metin Bildiri)

5. A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD

MISIRLI C., CEVİZ M., ÇETİNTAV I., ERSOY B.

UNITECH 2021, Gabrovo, Bulgaristan, 19 Kasım 2021, cilt.63, ss.55-58, (Tam Metin Bildiri)

6. Investigation Of The Effects Of Cutting Tool, Cutting Speed And Material Type On Surface Roughness.

MISIRLI C., CEVİZ M.

International Conference on Engineering, Technologies and Systems TECHSYS 2016, Technical University – Sofia, Plovdiv branch 26 – 28 May 2016, Plovdiv, Bulgaria., 24 - 28 Mayıs 2016, (Tam Metin Bildiri)

Metrikler

Öğr. Gör. MEHMET CEVİZ

Yayınlar & Eserler

1. Investigation of Mechanical, Thermal and Microstructural Properties of Waste Micro-Nano Nichrome (NiCr 80/20) Powder-Reinforced Composites with Polyamide 66 (PA66) Matrix

2. Comparative experimental analysis of wear behavior of CuCrZr and CuZn39Pb3 alloys using pin-on-disc test from room temperature to high temperatures CuCrZr ja CuZn39Pb3 sulamite kulumiskäitumise eksperimentaalne võrdlus pin-on-disc meetodil toatemperatuurist kõrgematel temperatuuridel

3. Finite element simulation and experimental study on defects in CuZn40Pb2 brass alloy water valve covers during hot forging Lõplike elementide simulatsioonimudel defektide uurimiseks CuZn40Pb2 messingisulamist veeventiili katetes kuumsepistamise protsessis

4. Characterization of Waste Micro and Nano Tungsten Carbide Powder Reinforced Polyamide 66 Matrix Composites

5. Effect of high temperatures on dry sliding friction and wear behaviour of CuCrZr copper alloy

6. The Effect of Temperature on Wear Performance of High-Velocity Oxy-Fuel Sprayed WC-10Co-4Cr Coating on AA7075-T6 Substrate

7. An Investigation on Thermal Dry Sliding Wear Performance of Wrought AA 7075-T6

8. AN INVESTIGATION ABOUT THE EFFECT OF LOAD ON DRY SLIDING WEAR PERFORMANCE OF AA7075-T6

9. A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD

10. The effects on surface roughness of parameters in machining

1. Numerical Simulation of Closed Die Hot Forging Process of CuZn40Pb2 Brass Alloy Valve Body Cover

2. Characterization of Waste Micro-Nano WC/Co-Cr 86/10-4 Powder Reinforced Polyamide 66 (PA66) Matrix Composites

3. Finite Element Simulation and Experimental Study on Defects in CuZn40Pb2 Brass Alloy Water Valve Covers During Hot Forging

4. An investigation about the effect of load on dry sliding wear performance of AA7075-T6

5. A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD

6. Investigation Of The Effects Of Cutting Tool, Cutting Speed And Material Type On Surface Roughness.

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje