Dr. Öğr. Üyesi IŞIK ÇETİNTAV

Yayın Ağı

Makaleler 10

1. Finite element simulation and experimental study on defects in CuZn40Pb2 brass alloy water valve covers during hot forging Lõplike elementide simulatsioonimudel defektide uurimiseks CuZn40Pb2 messingisulamist veeventiili katetes kuumsepistamise protsessis

CEVİZ M., ÇETİNTAV I.

Proceedings of the Estonian Academy of Sciences , cilt.74, sa.1, ss.82-89, 2025 (SCI-Expanded, Scopus)

2. Comparative experimental analysis of wear behavior of CuCrZr and CuZn39Pb3 alloys using pin-on-disc test from room temperature to high temperatures CuCrZr ja CuZn39Pb3 sulamite kulumiskäitumise eksperimentaalne võrdlus pin-on-disc meetodil toatemperatuurist kõrgematel temperatuuridel

ÇETİNTAV I., CEVİZ M.

Proceedings of the Estonian Academy of Sciences , cilt.74, sa.2, ss.253-259, 2025 (SCI-Expanded, Scopus)

3. Investigation of Residual Stress Variation in Sequential Butt Welding and Pocket Material Removal Machining Processes Utilizing Pre-Stress Method: A 3D Simulation Approach

ÇETİNTAV I., ÇAN Y., Akkus N.

Metals , cilt.14, sa.12, 2024 (SCI-Expanded, Scopus)

4. Investigation of Microstructure of AA7075 Alloys After Severe Plastic Deformation Application

MISIRLI C., ÇETİNTAV I.

Fundamental Sciences and Applications , 2024 (Hakemli Dergi)

5. Characterization of Waste Micro and Nano Tungsten Carbide Powder Reinforced Polyamide 66 Matrix Composites

ÇETİNTAV I., CEVİZ M.

MATERIALS SCIENCE FORUM , cilt.1104, ss.45-51, 2023 (Scopus)

6. Determination of the Change in Electrical Conductivity of Single, Bimetallic and Trimetallic Cylindrical Billets with Plastic Deformation Induced by Upsetting Process

ÇETİNTAV I., MISIRLI C., ÇAN Y.

Tehnicki Vjesnik , cilt.29, sa.5, ss.1472-1477, 2022 (SCI-Expanded, Scopus)

7. A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD

MISIRLI C., CEVİZ M., ÇETİNTAV I., Ersoy B.

Journal of the Technical University of Gabrovo , cilt.63, ss.55-58, 2021 (Hakemli Dergi)

8. Numerical Analysis of bi-Metallic Parts Using a Finite Element Sotware

MISIRLI C., ÇETİNTAV I., ÇAN Y., MISIRLI C.

Journal of the Technical University –Sofia Plovdiv Branch, Bulgaria – Fundamental Sciences and Applications , cilt.23, ss.129-135, 2017 (Hakemli Dergi)

9. Upsetting of Tri Metallic St Cu Al and St Cu60Zn Al Cylindrical Billets

ÇETİNTAV I., MISIRLI C., ÇAN Y.

International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering , 2016 (Hakemli Dergi)

10. Experimental and fem study of open die forging for bimetallic cylindrical parts produced using different materials

MISIRLI C., ÇETİNTAV I., ÇAN Y.

International Journal of Modern Manufacturing Technologies , cilt.8, sa.1, ss.69-74, 2016 (Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 18

1. Numerical Simulation of Closed Die Hot Forging Process of CuZn40Pb2 Brass Alloy Valve Body Cover

CEVİZ M., ÇETİNTAV I., Gunel D.

2023 International Conference of Computational Methods in Sciences and Engineering, ICCMSE 2023, Heraklion, Yunanistan, 23 - 26 Mayıs 2023, cilt.3269, (Tam Metin Bildiri)

2. High-Temperature Wear Behavior of CuZn39Pb3 Alloy: Experimental Study

ÇETİNTAV I.

NORDTRIB 2024 - Nordic Tribology Symposium 2024, Kopenhag, Danimarka, 11 - 14 Haziran 2024, (Özet Bildiri)

3. Characterization of Waste Micro-Nano WC/Co-Cr 86/10-4 Powder Reinforced Polyamide 66 (PA66) Matrix Composites

ÇETİNTAV I., CEVİZ M.

30th International Baltic Conference Materials Engineering and Modern Manufacturing 2023, Kaunas, Litvanya, 19 - 20 Ekim 2023, (Özet Bildiri)

4. Finite Element Simulation and Experimental Study on Defects in CuZn40Pb2 Brass Alloy Water Valve Covers During Hot Forging

CEVİZ M., ÇETİNTAV I.

3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials(IWPDF 2023), İstanbul, Türkiye, 4 Ekim - 06 Kasım 2023, (Tam Metin Bildiri)

5. Estimation and Validation Residual Stresses of Butt Welding and Pocket Machining Processes via Sequential Simulation

ÇETİNTAV I., Akkus N., ÇAN Y.

International Conference on Numerical Analysis and Applied Mathematics 2021, ICNAAM 2021, Rhodes, Yunanistan, 20 - 26 Eylül 2021, cilt.2849, (Tam Metin Bildiri)

6. 3D Simulation And Residual Stress Analysis Of Joining Aa7075 Alloy Sheet With Laser Welding Methods

MISIRLI C., ÇETİNTAV I.

Unitech 2022 Gabrovo, Gabrovo, Bulgaristan, 18 - 19 Kasım 2022, (Tam Metin Bildiri)

7. A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD

MISIRLI C., CEVİZ M., ÇETİNTAV I., ERSOY B.

UNITECH 2021, Gabrovo, Bulgaristan, 19 Kasım 2021, cilt.63, ss.55-58, (Tam Metin Bildiri)

8. Prediction of Residual Stresses After Sequential Processes Welding and Machining

AKKUŞ N., ÇETİNTAV I., ÇAN Y.

IIW 2017 International Conference, 29 - 30 Haziran 2017, (Tam Metin Bildiri)

9. Kesici Takımların AlTiN Yüzey Kaplama İşlemi Sonrası Kesme Ömrü ve Maliyet açısından Karşılaştırılması

ŞAHİN M., MISIRLI C., SELVİ S., ÇETİNTAV I.

2ND International Congress On Engineering Architecture and Design, 12 - 13 Mayıs 2017, (Özet Bildiri)

10. AlTiN Kaplamalı Kesici Takımların Kesme Performanslarının İncelenmesi

ŞAHİN M., MISIRLI C., SELVİ S., ÇETİNTAV I.

2ND International Congress On Engineering Architecture and Design, 12 - 13 Mayıs 2017, (Özet Bildiri)

11. KESİCİ TAKIMLARIN AlTiN YÜZEY KAPLAMA İŞLEMİ SONRASI KESME ÖMRÜ VE MALİYET AÇISINDAN KARŞILAŞTIRILMASI

ŞAHİN M., MISIRLI C., SELVİ S., ÇETİNTAV I.

2ND INTERNATIONAL CONGRESS ON ENGINEERING ARCHITECTURE AND DESIGN, 12 - 13 Mayıs 2017, (Özet Bildiri)

12. AlTiN KAPLAMALI KESİCİ TAKIMLARIN KESME PERFORMANSLARININ İNCELENMESİ

ŞAHİN M., MISIRLI C., SELVİ S., ÇETİNTAV I.

2ND INTERNATIONAL CONGRESS ON ENGINEERING ARCHITECTURE AND DESIGN, 12 - 13 Mayıs 2017, (Özet Bildiri)

13. Yığma Prosesinde Kullanılan Farklı Yağlayıcıların Bimetalik Malzemelerin Malzeme Akışına Etkisi

ŞAHİN M., MISIRLI C., SELVİ S., ÇETİNTAV I.

2ND International Congress On Engineering Architecture and Design, 12 - 13 Mayıs 2017, (Özet Bildiri)

14. YIĞMA PROSESİNDE KULLANILAN FARKLI YAĞLAYICILARIN BİMETALİK MALZEMELERİN MALZEME AKIŞINA ETKİSİ

ŞAHİN M., MISIRLI C., SELVİ S., ÇETİNTAV I.

2ND INTERNATIONAL CONGRESS ON ENGINEERING ARCHITECTURE AND DESIGN, 12 - 13 Mayıs 2017, (Özet Bildiri)

15. Assessment of residual stress distribution of sequential welding and machining process by consecutive finite element analysis

Akkus N., Cetintav I., Can Y.

14th International Conference on Fracture, ICF 2017, Rhodes, Yunanistan, 18 - 20 Haziran 2017, cilt.2, ss.360-361, (Tam Metin Bildiri)

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Dr. Öğr. Üyesi IŞIK ÇETİNTAV

Yayınlar & Eserler

1. Finite element simulation and experimental study on defects in CuZn40Pb2 brass alloy water valve covers during hot forging Lõplike elementide simulatsioonimudel defektide uurimiseks CuZn40Pb2 messingisulamist veeventiili katetes kuumsepistamise protsessis

2. Comparative experimental analysis of wear behavior of CuCrZr and CuZn39Pb3 alloys using pin-on-disc test from room temperature to high temperatures CuCrZr ja CuZn39Pb3 sulamite kulumiskäitumise eksperimentaalne võrdlus pin-on-disc meetodil toatemperatuurist kõrgematel temperatuuridel

3. Investigation of Residual Stress Variation in Sequential Butt Welding and Pocket Material Removal Machining Processes Utilizing Pre-Stress Method: A 3D Simulation Approach

4. Investigation of Microstructure of AA7075 Alloys After Severe Plastic Deformation Application

5. Characterization of Waste Micro and Nano Tungsten Carbide Powder Reinforced Polyamide 66 Matrix Composites

6. Determination of the Change in Electrical Conductivity of Single, Bimetallic and Trimetallic Cylindrical Billets with Plastic Deformation Induced by Upsetting Process

7. A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD

8. Numerical Analysis of bi-Metallic Parts Using a Finite Element Sotware

9. Upsetting of Tri Metallic St Cu Al and St Cu60Zn Al Cylindrical Billets

10. Experimental and fem study of open die forging for bimetallic cylindrical parts produced using different materials

1. Numerical Simulation of Closed Die Hot Forging Process of CuZn40Pb2 Brass Alloy Valve Body Cover

2. High-Temperature Wear Behavior of CuZn39Pb3 Alloy: Experimental Study

3. Characterization of Waste Micro-Nano WC/Co-Cr 86/10-4 Powder Reinforced Polyamide 66 (PA66) Matrix Composites

4. Finite Element Simulation and Experimental Study on Defects in CuZn40Pb2 Brass Alloy Water Valve Covers During Hot Forging

5. Estimation and Validation Residual Stresses of Butt Welding and Pocket Machining Processes via Sequential Simulation

6. 3D Simulation And Residual Stress Analysis Of Joining Aa7075 Alloy Sheet With Laser Welding Methods

7. A STUDY ON THE PREVENTION OF SURFACE DEFECTS CAUSED BY LUBRICATION IN PRODUCT PRODUCTION FROM ZAMAK 3 BY INJECTION METHOD

8. Prediction of Residual Stresses After Sequential Processes Welding and Machining

9. Kesici Takımların AlTiN Yüzey Kaplama İşlemi Sonrası Kesme Ömrü ve Maliyet açısından Karşılaştırılması

10. AlTiN Kaplamalı Kesici Takımların Kesme Performanslarının İncelenmesi

11. KESİCİ TAKIMLARIN AlTiN YÜZEY KAPLAMA İŞLEMİ SONRASI KESME ÖMRÜ VE MALİYET AÇISINDAN KARŞILAŞTIRILMASI

12. AlTiN KAPLAMALI KESİCİ TAKIMLARIN KESME PERFORMANSLARININ İNCELENMESİ

13. Yığma Prosesinde Kullanılan Farklı Yağlayıcıların Bimetalik Malzemelerin Malzeme Akışına Etkisi

14. YIĞMA PROSESİNDE KULLANILAN FARKLI YAĞLAYICILARIN BİMETALİK MALZEMELERİN MALZEME AKIŞINA ETKİSİ

15. Assessment of residual stress distribution of sequential welding and machining process by consecutive finite element analysis

16. Design of a new type of solar tracker solar panel system

17. Application and Optimization Sheet Metal Cutting and Forming Dies

18. Analysis of Bimetallic Cylindrical Components in Cold Upsetting Process

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Açık Erişim